Posts Tagged ‘blind contour’

Blind contour street drawings

Tuesday, September 15th, 2009

I did some blind contours today while waiting for my cousin. I’m pretty happy with them, I think there’s a painting in there somewhere.

bc-church-jpg

bc-hotdog1-jpg

bc-hotdog2-jpg

I think they turned out better than these cruddy, lazy ones I did last week at the park.

bc-doglady-jpg

bc-squirrels-jpg

Zoo scribbles

Tuesday, September 29th, 2009

Went to the zoo on Saturday and did a few sketches!

zoogiraffe1-jpg zoogiraffe2-jpg

zooelephant-jpg

zoolioness-jpg

zoolion-jpg

Lino-cut printing process

Tuesday, September 29th, 2009

I finished a lino-cut today that I’ve been working on and I documented my process along the way. This is a reduction print. This means you start with a blank block, or plate, and work backwards to your last colour layer. This is usually black. The general rule is to start with your lightest ink, and end with your darkest. You also have to keep in mind that a fairly transparent ink may not adequately cover your previous layer.

I used water-soluble Speedball block inks, which are relatively non-toxic for use at home and is also quick to dry and very easy to clean up. These inks, the roller (brayer), barren, and linoleum can all be purchased at most art/craft supply stores. The nice paper is a bit harder to find (Lana Gravure), but any smooth printmaking, drawing, or watercolour paper will do.

I took a workshop from visiting artist Laura Peturson at St. Michael’s Printshop this summer and learned this water-based technique. I left a day between printing each layer, but you can print again within a couple of hours. However, if the humidity is high, the ink can take a long time to dry.

This is my third print using this method, and, as you can see, I’m still having problems with laying the inks down nice and smoothly. You can see that the yellow, red, and grey layers are a bit splotchy. I’ve made several one-colour lino-cuts in the past and I think I’ll go back and make a few of those.

I hope you find this informative!

step001 step002

Above: Steps 1 and 2. I had already cut away the first white (or paper colour) layer before I decided to take pictures. Here is my block with the yellow ink rolled out on it.

step003 step004

Steps 3 and 4. Here is the first layer, yellow, all printed. Next, I’ve cut away everything that I want to remain yellow in preparation for printing the red layer. Pics of me cutting and printing lower down.

step005 (2) step006

Steps 5 and 6. Here, the red ink has been rolled onto the block and you can see the details more clearly.

step007 step008

Steps 7 and 8. Here’s the print with yellow and red on it now. Also, a close-up of the block. The ink will only be printed if it is on the smooth, flat surface of the linoleum.

step009 step010

Steps 9 and 10. Here is my block and my reference picture that I coloured digitally. And here is my block with the third colour, grey, rolled up on it.

step011 step012

Steps 11 and 12. Here’s the print with the grey on top of the yellow and red. And, finally, I took a picture of me cutting the block with my wood-cutting tools. Always push away from yourself!

step013 step014

Steps 13 and 14. Here’s the plate with only the black lines left. And here is the black ink rolled out onto a sheet of plexiglass. My paper is also face-down on top of the block here. I have a template drawn underneath so I know where to place the block and the paper every time. The block is taped down as well, so it won’t move while I am printing.

step015 step016

Steps 15 and 16. Here I am printing. I’m using a lot of pressure and moving the barren in a circular motion all over the back of the paper. Next is the block with the black ink rolled up on it. You can see the text is backwards because I forgot to invert my image before transferring it to the lino using carbon paper. I often forget this step!

step017

Step 17. Done! A bit splotchy and offset, but I’m pretty happy with it. It measures about 8″ x 9″.

UPDATE (03/21/11): I’ve recently learned that water-based inks work best with soft-cut type lino blocks, and not so well with traditional linoleum. This may be the reason for my splochiness! Oil-based inks work better with linoleum. I don’t really like the texture of the soft-cut blocks, but will try one on my next project and report back.

Food vehicles

Saturday, October 24th, 2009

A couple new paintings for upcoming events at Eastern Edge Gallery.

bbqcorner_jpg


BBQ Corner, acrylic and permanent marker on board, 11″x14″

Wokking_jpg

Wokking on Wheels, acrylic and permanent marker on board, 9″x12″

May the robots be with you

Friday, January 29th, 2010

I’m making some of my ATC images into paintings. Here is the beginning! Can you guess who these guys are?

robots001

Work in prog

Tuesday, March 16th, 2010

I’m working on some paintings for an upcoming show at The Leyton Gallery in a couple of months. I seem to be on a wildlife kick so far.